Changing violin stringsPosted: April 24, 2011
Throughout your career as a violinist, you will find yourself changing the strings on your violin often. As I have mentioned before, it is useful to always keep an extra set of strings in your violin case, just to be precautionary. Here are some useful tips for changing strings on your violin:
- When replacing all of the strings, violinists generally replace one string at a time. Do not remove all of the strings on a violin at the same time, or the fingerboard could collapse.
- Although the order you replace strings isn’t critical, many violinists start with the G-string, and work their way up to the E-string.
- If the string you are installing has a fine tuner, insert the ball or loop end of the string over the tuner cartridge in the tailpiece, and pull the string toward the bridge.
- If the string does not have a fine tuner, insert the ball or knotted end of the string through the tailpiece string hole, tug firmly to make sure the knot or ball is securely in the slot and pull the string toward the bridge. You may need to hold the ball or knot in place with your finger while increasing the tension of the string as you turn the peg.
- Slightly pull out the peg the string will go in until the peg hole is just inside of the pegbox. Thread the end of the string through the peg hole (let the string slightly protrude), and evenly begin winding it.
- Push the peg in as you’re turning the string to keep the peg from slipping.
- Generally, fine tuners are used only on the E-string, but beginning violinists often find it useful to have tuners for each string.
- When replacing all of the strings, violinists often tune all of the strings to an approximate correct pitch, then do the fine tuning to get each pitch precisely in tune.
- Be aware that when you put on all new strings, it will take more adjusting than usual to tune the violin.
- If your pegs are slipping or are too tight to securely adjust the strings, you may want to purchase a peg compound.
- If you don’t have peg compound and need a temporary quick fix for slipping or tight pegs, you may want to try these options:
For sticking pegs, pull the peg partially out, and rub pencil graphite on the sticking part of the peg.
For loose pegs, pull the peg partially out, and rub candle wax on the peg to help it stick.